Power Inductor Testing Under Bias
The Picotest J2131A, along with your Tektronix oscilloscope, supports power inductor
testing under Bias. Together they enable accurate shunt-through inductance measurement
of power inductors at various bias levels - up to and including saturation currents
up to 125ADC. The bundle enables the 2-port shunt through measurement using the
scope’s FRA features *
Applications and Benefits
- High current DC Bias Source for measuring inductors
- DC Bias Source is 0-125Amps (from a 5A power supply input)
- Uses the 2-port shunt- through measurement to compute value over frequency and DC
bias
- Multiple levels of protection for inductor disconnects
- Measure inductors from nH to 1uH
Products You Need
Picotest Inductor Tester Solution Bundle Add to Cart
Bundle includes:
- J2131A DC Bias Source with two (2) inductor mounts
- P9610A Power Supply
- J2113A Differential Amp
- Three (3) PDN Cables (Two (2) 0.5m BNC-SMA cables and One (1) 0.25m BNC-BNC cable)
Required from Tektronix
The J2131A unit uses the
2-port shunt through test configuration to perform the inductor measurement. It
cannot perform the measurement by itself. The 2-port shunt through measurement REQUIRES
a ground loop breaker, such as the Picotest J2113A.
App Notes/Support
J2131A DC Bias Injector Solution Brochure
https://www.picotest.com/downloads/BrochureJ2131ADCBiasedInductorFinal_TEK.pdf
J2131A DC Bias Injector App Note
https://www.picotest.com/downloads/AppNoteJ2131ADCBiasFinal_TEK.pdf
Demo-Guide-J2131A MASTER March 21 2020.docx
PSMA Video
\Dropbox\Steves Presentations and Workshops\PSMA 2020\PSMA 2020.mp4